Administration Overview; Native Mode Of The Switch - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4 Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix

Administration Overview

)
Table 4-3. Field Values for Feature Button Assignments (Digital Port Emulation)
Button
number
1
2
3
NOTE:
If the station screen includes the RC:___ field, leave it blank.
Table 4-4. Field Values for Display Button Assignments (Digital Port Emulation)
Button
number
1
2
3
4
5
6
7
Administration Overview
The chapter describes required administration for both CL Integration and DS
Integration. Refer to
optional switch feature administration.

Native Mode of the Switch

The DEFINITY AUDIX R4.0 system uses the TN568 circuit pack. However, many
switches do not recognize this circuit pack, so the DEFINITY AUDIX system must
emulate a circuit pack recognized by the switch (in this case, the TN2181). The
DEFINITY AUDIX system can be configured for ports in increments of 2, with a
Feature Buttons
lwc-store
lwc-cancel
aux-work Grp: xx
( xx = DEFINITY AUDIX hunt group
number)
Display Button
Assignment
normal
inspect
date-time
directory
cov-msg-rt
next
delete-msg
Chapter 6, "Optional Switch Feature
Issue 1
May 1999
Administration", for any
4-4