Available Lenses; Lens Selection - Barco Medea series Installation Manual

Lenses

5.1 Available lenses

This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio
greater than 3.15 is installed. For Northern America, installation requirements according to Risk
group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is
installed. Refer to the section dedicated to the HD in function of the lens Throw Ratio (TR), into the
Security chapter, before operation.
Available lenses
Partnumber
R9801724
R9801722
R9801719
R9801720
R9801721
(*) Professional use only.
Available lenses with lens adapter
Partnumber
R9802244
R9802243
R9802242
R9802241
R9801295
R9801226
R9801220
R9801221
R9801230
R9801216
R9801211
R9801249
(*) Professional use only.
(**) Need mechanical support.

5.2 Lens selection

How to select the right lens
1. Determine the required screen width (SW).
2. Determine the approximate position of the projector in the room.
3. Start up the Lens Calculator on the Barco website:
lenses for your configuration.
The Lens Calculator window opens.
38 R5906141 /02 Medea series
Description
GLD 0.85-1.06 : 1
GLD 1.06-1.43 : 1
GLD 1.43-2.12 : NON
MOTORIZED
GLD 1.43-2.12 : 1
GLD 2.12-3.18 : 1
Description
FLDX - lens EN67
FLDX - lens EN66
FLDX - lens EN63
FLDX - lens EN61
FLD+ - lens EN47
FLD+ - lens EN42
FLD+ Long Focus - lens EN45
FLD+ Short Focus - lens EN46
FLD+ - lens EN43
FLD+ - lens EN41
FLD+ - lens EN44
FLD - lens EN16
https://lenscalculator.barco.com/
Throw Ratio (on F80/
Medea)
0.85 - 1.06
1.06 - 1.43
1.43 - 2.12
1.43 - 2.12
2.12 - 3.18
Throw Ratio (on F80/
Medea)
0.91
1.12 - 1.70
1.68 - 2.38
2.38 - 3.51
0.91
1.12
1.12 - 1.70
1.12 - 1.70
1.68 -2.38
2.38 - 3.51
3.51 - 6.45
5.70 - 9.75
to determine the possible
Compliance
approved
approved
approved
approved
approved (*)
Compliance
approved
approved
approved
approved
approved (**)
approved
approved
approved
approved
approved
approved (*)
approved (*)