Barco Medea series Installation Manual page 47

Apply Scheimpflug correction
1. Loosen the three set screws (reference 1b, 2b, 3b). Use a size 5 hex key to do this.
1b
3b
Image 5-14
2. Adjust the left side Scheimpflug adjustment screw (reference 1) until the test image in the bottom right side of
the screen is in focus. Use a size 4 hex key to do this.
Note: This process may cause the other areas of the image to slide out of focus. This is totally normal.
1
Image 5-15
3. Adjust the right side Scheimpflug adjustment screw (reference 2) until the test image in the bottom left side of
the screen is in focus. Use a size 4 hex key to do this.
Note: This process may cause the other areas of the image to slide out of focus. This is totally normal.
Image 5-16
4. Adjust the bottom Scheimpflug adjustment screw (reference 3) until the test image in the top half of the screen
is in focus. Use a size 4 hex key to do this.
Note: This process may cause the other areas of the image to slide out of focus. This is totally normal.
2b
Lenses
R5906141 /02 Medea series 47