Quick Setup Via Direct Access - Barco Medea series Installation Manual

Placing new batteries in the remote control or plugging the remote to a projector via a cable will
automatically reset the address back to its default value '0'.

7.10 Quick setup via Direct access

Quick source selection
1. Press the Input button on the remote control or local keypad.
Image 7-7
The Source selection menu opens on the LCD display.
Image 7-8: Input selection
2. Use the arrow keys to select the desired source.
Quick test pattern selection
1. Press the Test pattern button on the remote control or local keypad.
Getting Started
R5906141 /02 Medea series 65