Barco Medea series Installation Manual page 43

Image 5-8
5. Hold the adapter with your left hand and turn the lens to right (CW) until it is locked (Image 5-8, Action arrow
2). A click indicates that the lens mount mechanism is locked.
Lens and adapter form now an unique assembly.
6. Align the lens assembly top marking (red) with the top of the projector lens holder, then insert the lens
assembly in the lens holder (Image 5-9, Action arrow 3).
Image 5-9
7. Turn the lens assembly to right (CW) until it is locked (Image 5-9, Action arrow 4). A click indicates that the
lens mount mechanism is locked.
8. Verify that the lens assembly is firmly in place (and the button is released) before removing your hand from the
lens.
Remove a lens with adaptor
1. Support the lens assembly (lens + adaptor) with one hand.
2. Use the other hand to push the lens button in order to release the lens mount mechanism (Image 5-10, Action
arrow 1).
Note: The lens button needs to be kept pushed in until the lens assembly has rotated about 10° with
respect to the lens holder.
1
2
R5906141 /02
Lenses
Medea series 43