Barco Medea series Installation Manual page 22

General
Once the projector has arrived at the installation site, it needs to be removed from the box and pallet in a safe
manner, without damaging the projector.
Required tools
cutter knife
How to unpack
1. Use the cutter to remove the plastic straps around the cardboard box, then open the box.
Image 2-3
2. Remove the accessories (manuals, remote control, etc. ) placed on top of the projector.
Image 2-4
3. Remove the polymeric foam.
4. Lift the projector (wrapped in a plastic bag) out of its packaging.
5. Place the projector on solid and stable surface, then remove the protected plastic bag.
Save the original shipping cardboard box and packing material. They will be necessary if you ever
have to ship your projector. For maximum protection, repack your projector as it was originally
packed at the factory.
A plastic lens holder cover is placed into the lens opening of the projector. It's recommended to
reuse this cover each time you transport the projector. This to prevent intrusion of dust and foreign
particles.
22 R5906141 /02 Medea series