Table of Contents
Advertisement
UK
Lubrication
After every approx. 10 working hours the wheels, ball bearings and
stop rings are tightened. Hoses, fittings and cylinders are inspected
Important:
for eventual leaks and are tightened too.
After every approx. 10 working hours all movable parts. After every 30 working hours the tip
cylinder's pins and the 3 pins in the drawbar are to be lubricated.
The bearings of the roller are to be lubricated after every 100 working hours and/or after cleaning.
Lubrication points
Important:
Oil, type Hydro Texaco HD32 has been filled in the hydraulic system.
After the season, the roller is to be cleaned and lubricated with grease and oil.
Empty the water from the rollers to avoid frost damage.
Important:
The piston rods are to be lubricated with grease, for long term storage.
Repairs
All repairs are to be performed with original HE-VA spare parts.
Grass-Roller 2,9m
Maintenance
11
22/05-2018
Advertisement
Table of Contents
