Table of Contents
Advertisement
UK
Levelling board
The levelling board is raised in proportion to the wear and tear of the tines. This is performed by
1
loosening 2 nuts
When the desired height is reached, the 2 nuts are tightened again
Be sure that all adjusters are set the same, otherwise the levelling board will operate unevenly. This is
easily done by measuring the length of the spindle.
Roller scraper
The scrapers are bolted on the end plates. In order to adjust the scraper bar loosen the 2 bolts at the
1
top
and push the scraper bar against the roller
placed 5 – 10 mm from the roller.
Grass-Roller 2,9m
, the using a 19 mm spanner on the thread spindle, which determines the height
2
2
1
2
. Please be aware that the scraper bar is to be
1
1
10
1
.
22/05-2018
2
Advertisement
Table of Contents
