Plausibility Defect Between Cacdsp And Envp - Mahindra Bolero Maxitruck Plus BS III 2013 Diagnostic Manual

Table of Contents

Advertisement

DIAGNOSTIC MANUAL
P0069
NORMAL OPERATION
Ignition ON
When engine running ,the difference in absolute value of
atmospheric pressure and boost pressure is with in the limit
DTC DETECTING CONDITIONS
Ignition ON
EMS ECU supply voltage 8-16V
When engine running, the difference in absolute value of
atmospheric value and boost pressure is out of range.
DTC REACTIONS
Engine Check lamp continuously ON
HEALING CONDITION
Ignition Off/On
CORRECTIVE ACTION
If this DTC occurs along with P0641 , then refer the diagnostic procedure to clear P0641 .This
DTC will get cleared along with P0641
If this DTC occurs awithout P0641 , then suspect Environment pressure sensor (Inside EMS ECU)
malfunction . Replace EMS ECU and verify
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2013 Mahindra & Mahindra Ltd. 
 
 
EMS

PLAUSIBILITY DEFECT BETWEEN CACDSP AND ENVP

DTC INFORMATION
MAN-00226
MAY 2013/Rev 1
PROBABLE CAUSES OF FAILURE
Sensor supply monitoring
error
Environment pressure
sensor malfunction (EMS
ECU)
180

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bolero maxitruck plus bs iv 2013

Table of Contents