Mahindra Bolero Maxitruck Plus BS III 2013 Diagnostic Manual page 27

Table of Contents

Advertisement

DIAGNOSTIC MANUAL
Suspect EMS ECU EEPROM
failure
Replace EMS ECU with a new
one.
Check and verify for any new
DTC's
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2013 Mahindra & Mahindra Ltd. 
 
 
EMS
STEP 1
Connect the smart tester
Turn the ignition ON
Initialise the diagnostic tool
Record the DTC and clear
Turn ignition OFF
Wait for 2 minutes
Turn ignition ON
Verify if P062F is present?
Is P062F present?
MAN-00226
MAY 2013/Rev 1
P 062F
Intermittent problem exists
Refer the intermittent problem
inspection procedure
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bolero maxitruck plus bs iv 2013

Table of Contents