Intermittent Problems; Recommended Trouble Shooting Process - Mahindra Bolero Maxitruck Plus BS III 2013 Diagnostic Manual

DIAGNOSTIC MANUAL
RECOMMENDED TROUBLE SHOOTINGPROCESS
Customer complaint

INTERMITTENT PROBLEMS

Check the following for intermittent problems

Poor mating of the connector halves/damage of connector locking

Terminals not fully seated in the connector body

Damage of harness and terminals

Connector pin separation from wire

Corrosion on pin contact points
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2013 Mahindra & Mahindra Ltd.
EMS
Record/Understand Customer Verbatim

What happened?

When it happened?

What was the event before that?

Does it happen all the time?

Does it happen only in some condition?
Search for Published quick solution in TEK
Follow DTC based diagnosis
Contact TEKliner with TAR
(Technical Assistance Request)
MAN-00226
MAY 2013/Rev 1
net
.
4