Attaching the ND filter
Attach the ND filter when the received light intensity is too large.
When attaching the ND filter, with screw holes in two locations on the sensor head, use the provided M2.64 bind screws to
firmly fix the filter in place. Set the tightening torque to 0.3Nm or less.
ND filter
MH11H03B0NA,
MH11H050NA,
MH11H080NA,
MH11H110NA,
MH11H35C3NA
Precautions
Attach the ND filter with care to avoid leaving fingerprints or scratches on the glass area. In addition, if it gets contaminated
with fingerprints or due to other reasons, use an optical cloth to wipe it down, so as to avoid scratching.
MH11H350NA
1 BEFORE USING THE PRODUCT
1.5 Installation Method
1
37