1.2
Handling of Laser Products
JIS/IEC/GB
A semiconductor laser is used as the beam source of the sensor.
The laser class is classified based on the JIS (JIS C 6802: 2014), IEC (IEC 60825-1: 2014), and GB standards (GB 7247.1:
2012).
Class
Maximum
Wavelength
output
*1
1
0.1mW
658nm
2
1mW
658nm
3R
5mW
658nm
*1 MH11H01A2NA: 0.3mW
Before handling laser products, read "Precautions for using laser products" in safety precautions carefully.
■Caution
• Please consult your local Mitsubishi representative if the product breaks down.
• Do not use the product in a way other than specified in this manual. Users may be exposed to hazardous laser radiation if
the device is controlled or adjusted in procedures not specified in this manual.
• Before use, carefully read the content of the warning labels shown below. The warning label is posted on the side surface of
the sensor head. Use the warning label including in the sensor head packaging as needed.
Model name
MH11H01ANA
MH11H03B0NA, MH11H05B0NA, MH11H08B0NA, MH11H11B0NA, MH11H35B0NA
MH11H05C0NA, MH11H08C0NA, MH11H11C0NA, MH11H35CNA
1 BEFORE USING THE PRODUCT
1.2 Handling of Laser Products
1
15