Section 4 Minimum Required Programming - NEC Sl2100 Networking Manual

SL2100
S 4 MINIMUM REQUIRED PROGRAMMING
ECTION
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when
programming this feature in the order they are most commonly used. These levels are used with
PCPro and WebPro wizards for feature programming.
• Level 1 – these are the most commonly assigned programs for this feature.
• Level 2 – these are the next most commonly assigned programs for this feature.
• Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program Program Name
Number
10-12-01 CPU Network Setup - IP Address
10-12-03 CPU Network Setup – Default
Gateway
10-12-07 CPU Network Setup – NAPT Rout-
er IP Address
(Default Gateway [WAN])
10-12-09 CPU Network Setup – IP Address
11-4
Description/Comments
Assign the IP Address for the
CPU's NIC card. If a VoIPDB is in-
stalled in the system it is recom-
mended to set this to 0.0.0.0 and
all connections to the system will
be made through the VoIPDB.
Assign the default gateway IP ad-
dress for the CPU.
Define the IP Address of the WAN
side of the router.
Assign the IP Address for the
VoIPDB. If a VoIPDB is installed
in the system it is recommended
to set PRG 10-12-01 to 0.0.0.0
and all connections to the system
will be made through the VoIPDB.
ISSUE 1.0
Assigned Data
1
0.0.0.0 ~
✓
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default =192.168.0.10)
0.0.0.0 ~ ✓
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
0.0.0.0 ~
✓
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
0.0.0.0 ~
✓
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 172.16.0.10)
Level
2 3
NAPT