NEC Sl2100 Networking Manual page 147

ISSUE 1.0
2.2.1 VoIPDB (DSP) Basic Setup
Program Number
84-26-01 VoIP Basic Setup – IP
Address
84-26-02 VoIP Basic Setup – RTP
Port Number
84-26-03 VoIP Basic Setup –
RTCP Port Number
(RTP Port Number + 1)
2.2.2 VoIP ToS Setup
Program Program Name
Number
84-10-01 ToS Setup – ToS Mode
2.2.3 SIP Peer to Peer
Program Program Name
Number
15-05-50 IP Telephone Terminal Basic
Data Setup – Peer to Peer
Mode
2.2.4 IP Extension Numbering
Program Program Name
Number
11-01-01 System Numbering
11-02-01 Extension Numbering
Networking Manual
Program Name
Assign the IP Address for
the DSP resource.
Note: The VoIPDB IP Ad-
dresses must be statical-
ly assigned.
Assign the RTP Port
Number.
Assign the RTCP Port
Number.
Description/
Comments
Use this field to define
your SIP QoS marking
for ToS or Diffserv.
When Input Data is set to
1, Item No. 07 is invalid.
When Data is set to 2,
Item No. 02 ~ 06 are in-
valid.
Description/
Comments
Enable or disable Peer-
to-Peer mode for SIP
phones. When PRG
10-33-05 NAT mode is
set to 1 (Enable), P2P
mode for SIp phones al-
ways set to Off automati-
cally regardless of this
program setting.
Description/
Comments
Refer to the SL2100 Pro-
gramming Manual for all
options and default set-
tings.
Assign up to eight digits
for extension numbering
Description/ Assigned Data
Comments
Default:
Slot 1 = 172.16.0.20
0~65534
Default for DSP1 is
10020
0~65534
Default for DSP1 is
10021
Assigned Data
0 = Disabled (Invalid)
1 = IP Precedence
2 = Diffserv
Default is 0
Assigned Data
0 = No (Disable)
1 = Yes (Enable)
(default is 0)
Assigned Data
1 = 3 Digit; Intercom
Default is 3 Digit; Intercom
Dial (Up to eight digits)
Default
Ports 1~84 = 101~184
SL2100
1 2 3
X
X
X
1 2 3
X
1 2 3
X
1 2 3
X
X
10-3