NEC Sl2100 Networking Manual page 83

ISSUE 1.0
Program/Item
No.
10-29-13 SIP Server Information Setup –
Proxy Host Name
6.9 SIP Registrar Setup
Program/Item
No.
10-29-05 SIP Server Information Setup –
Registrar Mode
10-29-06 SIP Server Information Setup –
Registrar IP Address
10-29-07 SIP Server Information Setup –
Registrar Port Number
10-29-11 SIP Server Information Setup –
Registrar Domain Name
10-29-15 SIP Server Information Setup –
Registration Expiry (Expire)
Time
10-29-20 Authentication Trial
10-29-21 NAT Router
Networking Manual
Description/
Selection
48 characters maximum
Default not assigned
Description/
Selection
0 = None
1 = Manual
Default is 0
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
0 ~ 65535
Default is 5060
128 characters maximum
Default not assigned
120 ~ 65535 seconds
Default is 3600
0 ~ 9
0 = No Authentication
Default is 1 (1 Authentication At-
tempt)
0 = Disabled
1 = Enabled
Default is 0
Assigned Data
Select SIP Profile 1-6.
Assigned Data
Define the Registrar Mode. This
should always be set to manual
when using SIP trunking.
Select SIP Profile 1-6.
Define the Registrar IP Address. The
carrier may provide an IP address. In
most cases, a domain name will be
used so this entry will be left at the
default.
Select SIP Profile 1-6.
Define the Registrar Port Numbers.
Select SIP Profile 1-6.
Define the Registrar Domain Name
(normally provided by the SIP carri-
er).
Select SIP Profile 1-6.
Example:
SIPconnect-sca@L0.cbeyond.net
Define the Registration Expire time –
the time allowed to register with the
SIP carrier.
Select SIP Profile 1-6.
This should stay at the default entry.
Select SIP Profile 1-6.
Select SIP Profile 1-6.
SL2100
Comments
Define the Proxy Host name
(NEC SL2100 proxy name).
Comments
7-15