NEC Sl2100 Networking Manual page 129

ISSUE 1.0
13.9 Guide to Feature Programming
Program Program Name
Number
10-12-03 CPU Network Setup –
Default Gateway
10-12-09 CPU Network Setup –
IP Address
10-12-10 CPU Network Setup –
Subnet Mask
84-26-01 VoIPDB Basic Setup –
IP Address
84-26-02 VoIPDB Basic Setup –
RTP Port Number
84-26-03 VoIPDB Basic Setup –
RTP Port Number
(RTP Port Number +1)
10-46-01 DT800/DT700 Server
Information Setup –
Register Mode
10-46-04 DT800/DT700 Server
Information Setup –
Server Name
Networking Manual
Description/Comments
VoIPDB uses the Default Gateway
that is assigned here.
Assign Layer 3 IP Address to the
VoIPDB connected to CPU.
Assign Subnet Mask to the VoIPDB
connected to CPU.
Assign an IP Address for the VoIPDB
DSP's.
Define which of the three Registration
modes you wish the SIP MLTs to use.
Plug and Play
When the phone boots up it will report
the ext assigned in the phone or
choose the next available extension in
the system. No password required.
Auto
If set to auto then the SIP user name
and password must be entered into
the actual IP phone. These settings
have to match Programs
84-22/15-05-27 or the phone does not
come on-line.
Manual
When the phone boots up it prompts
you to enter a user ID and password
before logging in. It checks this user
ID/password against Programs
84-22/15-05-27. If there is not a
match, the phone does not come on-
line.
USER ID of the SIP URL if Program
10-46-05 is set to domain name.
A SIP URL is made up of three parts.
Domain name, host name, and server
name.
e.g. At default the server name is
sipphd. The URL could look like the
following:
sipphd@voipu.nec.com
Assigned Data
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
Default is 0.0.0.0
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
Default is 172.16.0.10
Default is 255.255.0.0
Default Values:
Slot 1 = 172.16.0.20
Range: 0 ~ 65534
Default Values:
VoIP GW1 = 10020
Range: 1 ~ 65535
Default Values:
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245
0 = Plug and Play
1 = Automatic
2 = Manual
Default is 0
Up to 32 characters.
Default is sipphd
SL2100
1 2 3
X
X
X
X
X
X
X
X
9-31