NEC Sl2100 Networking Manual page 82

SL2100
Program/Item
No.
84-14-10 SIP Trunk Basic Information
Setup – URL Type
84-14-11 SIP Trunk Basic Information
Setup – URL/To HeaderSetting
Information
84-14-15 SIP Trunk Basic Information
Setup – 100rel Settings
6.8 SIP Server Information Setup
Program/Item
No.
10-29-01 SIP Server Information Setup –
Default Proxy (Outbound)
10-29-02 SIP Server Information Setup –
Default Proxy (Inbound)
10-29-03 SIP Server Information Setup –
Default Proxy IP Address
10-29-04 SIP Server Information Setup –
Default Proxy Port Number
10-29-12 SIP Server Information Setup –
Proxy Domain Name
7-14
Description/
Selection
0 = SIP-URL
1 = TEL-URL
Default is 0
0 = Proxy Server Domain
1 = SIP UA Domain
Default is 0
0 = Use Default Settings (100rel in-
cluded)
1 = Use Opposite Settings (100rel
not included)
Default is 0
Description/
Selection
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 0
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.225.255.254
Default is 0.0.0.0
0 ~ 65535
Default is 5060
64 characters maximum
Default not assigned
Assigned Data
Select SIP Profile 1-6.
Select SIP Profile 1-6.
Select SIP Profile 1-6.
Assigned Data
Select SIP Profile 1-6.
Select SIP Profile 1-6.
Select SIP Profile 1-6.
Select SIP Profile 1-6.
Select SIP Profile 1-6.
ISSUE 1.0
Comments
Comments
Define the SIP Proxy setup, De-
fault Proxy (Outbound).
When SIP trunking is used, this
must be on.
If entries are made in Program
10-29-xx for a SIP Server and the
SIP Server is then removed or
not used, the entries in Program
10-29-xx must be set back to
their default settings. Even if
10-29-01 is set to 0, the NEC
SL2100 still checks the settings
in the remaining 10-29 programs.
Define the Default Proxy (in-
bound).
Enter the default Proxy IP Ad-
dress if the SIP carrier is using an
IP Address for the Proxy. In most
cases, this is left at the default
entry as the domain name is
used.
Define the Proxy Port Number.
Define the Proxy Domain Name
(NEC SL2100 domain name).
SIP Trunking