Figure 9-4 Example Configuration 2 - Dynamic Ip Addressing, One Lan - NEC Sl2100 Networking Manual

SL2100
Chassis
NEC SL2100
VoIPDB IP Address
192.168.1.20
VoIP DSP:
Subnet Mask:
Default Gateway: 192.168.1.254

Figure 9-4 Example Configuration 2 - Dynamic IP Addressing, One LAN

Programming - CPU:
10-12-01 : CPU Network Setup - IP Address
10-12-10 : CPU Network Setup - Subnet Mask
10-12-03 : CPU Network Setup - Default Gateway
10-12-09 : CPU Network Setup - VoIPDB Address
(This assignment is for CPU-C1 when the VoIP daughter board is installed.)
10-13-01 : In-DHCP Server Setup - DHCP Server Mode
10-14-01 : Managed Network Setup (Min)
10-14-02 : Managed Network Setup (Max)
10-16-16 : SIP Server Address
10-16-27 : SIP Server Port
Programming - VoIP DSP:
84-26-01 : VoIP Basic Setup - IP Address
Programming - IP Phones:
DHCP Mode (Ext. 200):
6.3 Example Configuration 3 - Static IP Addressing, Routed WAN
This example shows IP Phones connected to an NEC SL2100 system over a Wide Area Network
(WAN), with static IP addressing. This is a typical scenario - a small branch office connecting to the
main office.
9-6
CPU-C1
VoIP
192.168.1.21
255.255.255.0
192.168.1.200
Extension: 200
PoE Switch
IP Phone 1 IP Phone 2
192.168.1.201
Extension: 201
0.0.0.0
255.255.255.0
192.168.1.254
192.168.1.20
Enable
192.168.1.200 Min
192.168.1.250 Max
192.168.1.20
5080
192.168.1.21
Enabled
IP Multiline Station (SIP)
ISSUE 1.0