Aircoat Pre-Atomizer Nozzles Ac3000 Plus; Push-In Filter - WAGNER GM 4700AC Original Operating Manual

VERSION 06/2018

13.5 AIRCOAT PRE-ATOMIZER NOZZLES AC3000 PLUS

Article No. 321xxx
Size Spray angle
20° 30°
08 208 308
10 210 310
12 212 312
14 214 314
16 216 316
18
218 318
20
320
22
B_05736
100 145
(3,94) (5,71)
Spray pattern width mm (inch)**
* Tested with water and 100 bar pressure.
** Tested with 110 bar (1595 psi), 30 cm (11.81 inches) distance and lacquer 56DIN-4s.

13.6 PUSH-IN FILTER

Order no.
2315723 Push-in filter, red (10 pieces)
2315724 Push-in filter, blue (10 pieces)
2315725 Push-in filter, yellow (10 pieces)
2315726 Push-in filter, white (10 pieces)
2315729 Push-in filter, green (10 pieces)
ORDER NUMBER DOC2311730
In order to determine the article number of a nozzle, please select the
number from the table and replace the three xxx.
Example: nozzle 410 -> article number 321410
40° 50° 60°
408 508
410 510 610
412 512 612
414 514 614
416 516 616
418 518 618
420 620
422 622
195 250 300
(7,68) (9,84) (11,81)
Filter sizes
Product filter (in mesh)
Edge filter Gun filter
Mesh Use for nozzles
200 0.007" - 0.011"
150 0.011" - 0.013"
100 0.013" - 0.019"
50 0.019" - 0.023"
30 0.019" - 0.023"
Drilled hole Product flow*
inch (mm) l/min (gal/min)
0,008 0,22
(0,20) (0,058)
0,010 0,32
(0,25) (0,084)
0,012 0,44
(0,30) (0,116)
0,014 0,60
(0,36) (0,159)
0,016 0,76
(0,41) (0,201)
0,018 0,92
(0,46) (0,244)
0,020 0,11
(0,51) (0,030)
0,022 0,14
(0,56) (0,036)
B_02393
45