Eu Declaration Of Conformity - WAGNER GM 4700AC Original Operating Manual

VERSION 06/2018
Order no. Designation
1
1 2315723
1 2315724
64
1 2315725
1 2315726
1 2315729
65 1
66 1 2311491
67 1 2320016
69 1 9998910
70 1 9998911
2352651
71 1
72 1
1
= Wearing part
= Included in service set
= Not part of the standard equipment but available as a special accessory

15 EU DECLARATION OF CONFORMITY

Herewith we declare that the supplied version of:
GM 4700AC 25 MPa
GM 4700AC-H 25 MPa
complies with the following guidelines:
2006/42/EC
2014/34/EU
Applied standards, in particular:
EN ISO 12100:2010
EN 1953:2013
EN ISO 13732-1:2008
EN 14462:2015
Applied national technical standards and specifications, in particular:
DGUV regulation 100-500 Chapter 2.29
DGUV regulation 100-500 Chapter 2.36
TRGS 727
Identification:
EU Declaration of Conformity
The EU Declaration of Conformity is enclosed with this product. If needed, further copies
can be ordered through your WAGNER dealer by specifying the product name and serial
number.
Order number:
2316429
ORDER NUMBER DOC2311730
-- Filter insert, yellow (middle), 100 mesh per inch*
*Filter insert, red (fine), 200 mesh per inch, 10 pieces
*Filter insert, blue (middle), 150 mesh per inch, 10 pieces
*Filter insert, yellow (middle), 100 mesh per inch, 10 pieces
*Filter insert, white (coarse), 50 mesh per inch, 10 pieces
*Filter insert, green (coarse), 30 mesh per inch, 10 pieces
128389 Seal
Turning handle
Filter housing, complete
Instruction label "hot surfaces"
Protection label for 9998910
Spring cap 35 MPa; 350 bar; 5076 psi
Pressure spring for spring cap 35 MPa; 350 bar; 5076 psi
--
394941 Service set GM 4600/4700AC
EN 1127-1:2011
EN ISO 80079-36:2016
EN ISO/IEC 80079-34:2011
--
55