Assembly - WAGNER GM 4700AC Original Operating Manual

VERSION 06/2018

10.9.2 ASSEMBLY

1. Apply the Loctite ® 638 to the thread and between the hollow screw and filter
connection.
2. Put the filter connection into the gun connection, align and tighten the hollow screw
with a tightening torque of 15 Nm; 11 lbft.
Exceeding the allowable torque will damage the filter connection.
WARNING
Hot gun housing!
Burns.
Wear protective gloves when dismounting the filter connection.
3. Harden the adhesion point in the housing in an oven at 40 °C; 104 °F for at least 30
minutes.
4. After cooling off, completely assemble the spray gun. In doing so, note the assembly
information in the spare part drawing in Chapter 14.2 of the operating manual.
5. Use a suitable medium to check the spray gun for leaks at 25 MPa; 250 bar; 3626 psi
or 16 MPa; 160 bar; 2320 psi.
ORDER NUMBER DOC2311730
15 Nm;
11 lbft
Order no. 2320114
B_04160
Loctite 638
Loctite 638
40