Installation And Connection; Typical Aircoat Spraying System; Ventilation Of The Spray Booth - WAGNER GM 4700AC Original Operating Manual
Aircoat manual gun for flat and round jet nozzles
Hide thumbs
Also See for GM 4700AC:
- Operating manual (80 pages) ,
- Translation of the original operating manual (48 pages)
Table of Contents
Advertisement
VERSION 06/2018
6.4
INSTALLATION AND CONNECTION
The AirCoat manual gun GM 4700AC must be combined with various components to make
up a spraying system. The system shown in the figure is only one example of an AirCoat
spraying system. Your WAGNER distributor would be happy to assist you in creating a
spraying system solution that meets your individual needs.
You must familiarize yourself with the operating manuals and the safety regulations of all
additional system components before starting commissioning.
6.4.1 TYPICAL AIRCOAT SPRAYING SYSTEM
K
C
I
L
Designation
A Product pump
B Compressed air shut-off valve
C Pressure regulator
D Air pressure regulator with air filter
E Grounding cable
F Air hose, electrically conductive
G AirCoat spray gun
6.4.2 VENTILATION OF THE SPRAY BOOTH
Operate the device in a spray booth approved for the working materials.
- or -
Operate the device on an appropriate spraying wall with the ventilation (extraction)
switched on.
Observe national and local regulations for the exhaust air speed.
ORDER NUMBER DOC2311730
E
H
M
D
B
A
J
G
F
N
B_02380
Designation
H High pressure product hose
I
High-pressure filter/product
pressure release
J
Return line
K Pump mounting trolley
L Suction system
M Compressed air network
N Protective hose
20
Advertisement
Table of Contents
