Specifications - Sony STR-DH720HP Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
1)
USA model
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
1)
Canada model
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
1)
Europe model
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
GB
84
95 W + 95 W
105 W + 105 W
2)
140 W per channel
85 W + 85 W
105 W + 105 W
2)
140 W per channel
85 W + 85 W
100 W + 100 W
2)
140 W per channel
1)
Measured under the following conditions:
Area
USA, Canada
Europe
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog
Input
Analog
Digital (Coaxial) Impedance: 75 ohms
Digital (Optical) S/N: 100 dB
Output (Analog)
AUDIO OUT
SUBWOOFER
Equalizer
Gain levels
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
Intermediate frequency
Power requirements
120 V AC, 60 Hz
230 V AC, 50 Hz
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 500 mV/
50 kohms
3)
S/N : 96 dB
4)
(A, 500 mV )
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Voltage: 500 mV/
1 kohms
Voltage: 2 V/1 kohm
±6 dB, 1 dB step
87.5 MHz – 108.0 MHz
FM wire antenna (aerial)
75 ohms, unbalanced
10.7 MHz