Guide to on-screen
You can display the menu of the receiver on
the TV screen and select the function you want
to use on the TV screen by pressing V/v/B/b
on the remote control.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in "GUI
MODE" following the steps in "To turn "GUI
MODE" on and off" (page 39).
Using the menu
Switch the input of the TV so
that an image of the menu is
Press GUI MODE.
After "GUI ON" appears on the display
panel for a while, the GUI menu appears
on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
Press V/v repeatedly to select a
menu you want, then press
or b to enter the menu.
The menu item list appears on the TV
Example: When you select "
Press V/v repeatedly to select
the menu item you want to
adjust, then press
the menu item.
Repeat steps 3 and 4 to select
the parameter you want.
To return to the previous screen
Press RETURN/EXIT O.
To exit the menu
To turn "GUI MODE" on and off
Press GUI MODE. "GUI ON" or "GUI OFF"
appears on the display panel, depending on the