Sony STR-DH720HP Operating Instructions Manual page 42

Tips
• You can turn INPUT SELECTOR on the receiver
or press input buttons on the remote control to
select the equipment you want.
• You can adjust the volume differently depending
on the speed you turn the MASTER VOLUME on
the receiver.
To turn the volume up or down quickly: turn the
knob quickly.
To make fine adjustment: turn the knob slowly.
• You can adjust the volume differently depending
on the length of time you press and hold the
MASTER VOL +/– or
control.
To turn the volume up or down quickly: press and
hold the button.
To make a fine adjustment: press the button and
release it immediately.
To activate the muting function
Press MUTING or
The muting function will be canceled when
you do the following.
• Press MUTING or
• Increase the volume.
• Turn off the receiver.
• Perform Auto Calibration.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
GB
42
2
+/– on the remote
.
again.
Naming the input (Name Input)
You can enter a name of up to 8 characters for
inputs and display it.
It is more recognizable having the equipment
named on the display than the jacks.
1
Select the input you want to
name from "
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Select "Name Input", then
press or b.
4
Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing B/b.
5
Repeat step 4 to input a
character one by one, then
press .
The name you entered is registered.
Input" screen.