Preparing the Receiver
Initializing the receiver
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to revert back to the factory default
Be sure to use the buttons on the receiver to
perform this operation.
Press ?/1 to turn off the
Hold down ?/1 for 5 seconds.
The "CLEARING" appears on the
display panel for a while, then changes to
Changes or adjustments made to the
settings are now reset to the defaults.
Setting the speakers
Selecting the speaker pattern
Select the speaker pattern according to the
speaker system which you are using.
Press GUI MODE.
After "GUI ON" appears on the display
panel for a while, the GUI menu appears
on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
Press V/v repeatedly to select
Settings", then press
The Settings menu list appears on the TV