Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation, be
sure you have connected the FM and AM
antennas (aerials) to the receiver (page 32).
The tuning scale for direct tuning is shown below.
* The AM tuning scale can be changed (page 50).
Press GUI MODE.
Press MENU if the GUI menu does not
appear on the TV screen.
FM" or "
the menu, then press
The FM or AM menu list appears on the
Tuning to a station
automatically (Auto Tuning)
Select "Auto Tuning", then
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 49), or select the preset station you
want (page 50).
Select "FM Mode", then press
Select "MONO", then press
Tuning to a station directly
You can enter the frequency of a station
directly by using the numeric buttons.
Select "Direct Tuning", then