Download  Print this page

Recording Using The Receiver - Sony STR-DH720HP Operating Instructions Manual

Hi-fi receivers: multi channel av receiver.
Hide thumbs


Table of Contents
• Some time may be needed to start playback
– the folder structure is complex.
– the memory capacity is excessive.
• This receiver does not necessarily support
all the functions provided in a connected
USB device.
• The playback order for the receiver may
differ from the playback order of the
connected USB device.
• Folders that have no audio files are skipped.
• When playing a very long track, some
operations may cause playback delay.
USB message list
Message and explanation
The receiver is recognizing and reading information
of the USB device.
Device Error
The memory of the USB device could not be
recognized (page 46).
No Support
An unsupported USB device is connected, an
unknown device is connected, or the
USB device is connected through a USB hub
(page 46).
No Device
No USB device is connected.
No Track
No track was found.
Recording using the
You can record from an audio equipment
(e.g., CD recorder) or video equipment
(e.g., VCR, DVD recorder) using the receiver.
Refer to the operating instructions supplied
with your recording equipment.
Press one of the input buttons
to select the playback
equipment that you want to
You can also use INPUT SELECTOR on
the receiver.
Prepare the playback
equipment for playing.
Example 1 (audio recording):
Tune to the radio station you want to
Example 2 (video recording):
Insert the video tape you want to copy
into the VCR.
Prepare the recording
Example 1 (audio recording):
Insert a blank CD-R into the CD recorder
and adjust the recording level.
Example 2 (video recording):
Insert a blank video tape, etc. into the
recording equipment (connected to
VIDEO 1 OUT jacks) for recording.
Start recording on the
recording equipment, then start
the playback equipment.
• Some sources contain copyright protection to
prevent recording. In this case, you may not be able
to record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
• While only composite video signals are being
recorded, the auto standby function of the receiver
may start up and interrupt the recording. In this
case, set the "Auto Standby" to "OFF" (page 69).


Table of Contents

   Related Manuals for Sony STR-DH720HP

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: