Chapter 4 Cfast Card Installation; Mounting Procedure - Mitsubishi Electric MELIPC MI5000 Series User Manual

4
CFast CARD INSTALLATION
This chapter shows the procedure to insert a CFast card.
For procedure to remove the CFast card, refer to the following.
Page 151 Inserting and Removing a CFast Card
Precautions
• Turn OFF the power supply of this product before inserting a CFast card.
• If a CFast card is inserted while the power supply of the product is on, it will not be recognized.
• When using a CFast card for the first time, initialization (format) of the card is required. (Page 41 Initialization (Format))
4.1

Mounting Procedure

1.
Open the CFast/BATTERY cover.
2.
Pay attention to the orientation of the CFast card (1), and ensure that it is inserted straight into CFast card slot (2).
Insert the CFast card until its position is approximately the same height as the printed mark on the surface of the product.
3.
Close the CFast/BATTERY cover until it clicks.
4 CFast CARD INSTALLATION
40
4.1 Mounting Procedure
(2)
(1)