Performing Initialization - Mitsubishi Electric MELIPC MI5000 Series User Manual

Performing initialization

Shows steps for performing initialization.
• To initialize, select an operation mode when the power supply of the product is ON.
• If the HOME switch is pressed when the display of the dot matrix LED is not 'Offline mode', the dot matrix
LED returns to the default display ('Offline mode').
1.
Power ON the product while pressing the SELECT switch () (1) and HOME switch (2).
Press and hold the SELECT switch () and HOME switch until 'Offline mode' is displayed on the dot matrix LED.
(2)
(1)
2.
After 'Offline mode' is displayed on the dot matrix LED, release the SELECT switch () and HOME switch.
3.
Press the SELECT switches (/) (3) to select the diagnosis mode.
Switch until 'Setting mode' is displayed on the dot matrix LED.
(3)
4.
Press the SELECT switch () (4).
(4)
APPX
Appendix 7 Product Initialization
A
147