Chapter 7 Parameter Settings; Project Creation; Parameter Settings - Mitsubishi Electric MELIPC MI5000 Series User Manual

7

PARAMETER SETTINGS

This section shows the workflow up to the setting of parameters of this product.
1.
Creating a project
Create a new project.
2.
Setting parameters
Configure the parameters of this product.
3.
Writing parameters
Write the configured parameters to this product.
After writing the parameters, power off this product. (Page 134 Turning OFF or Resetting This Product)
Use MI Configurator, which is installed on this product, to configure parameters.
Settings of the connection destination are not necessary for MI Configurator that is installed on this product
because they are the settings to connect to the VxWorks part of this product. (MI Configurator Operating
Manual)
7.1

Project Creation

Start MI Configurator and create a project.
Window
[Project]  [New]
Operating procedure
In the "New" screen, select the product, and click the [OK] button.
7.2
Parameter Settings
Configure the parameters of this product.
Parameters
For details on each parameter, refer to the following manual.
MELIPC MI5000 Series User's Manual (Application)
■Basic parameters
[Navigation window][Parameter][MI5122-VW][Basic Parameter]
■CC-Link IE Field Network Parameters
[Navigation Window][Parameter][MI5122-VW][Applicable Parameters][CC-Link IE Field Network Parameters]
7 PARAMETER SETTINGS
68
7.1 Project Creation