Registration Of User Programs - Mitsubishi Electric MELIPC MI5000 Series User Manual

Registration of user programs

This section shows the registration procedure for user programs.
Storage locations
The following section shows the storage locations of user programs and script files.
For the storage configuration of this product, refer to the following section.
Page 106 Storage configuration
■User program
Store created user programs in a folder that can be accessed from the VxWorks part of this product.
■Script files
Store script files in the root directory of the user drive (/ROM).
Registration procedure
Register the user program using the network file access function of this product.
1.
Power ON the product.
2.
During development in a cross development configuration, connect this product and the development environment.
During an operation in a standalone development configuration, it is not necessary to connect the
development environment and this product.
3.
Access the user drive (/ROM) on VxWorks part of this product using the network file access function.
4.
Store the user programs and script files on this product.
5.
Turn the power OFF and ON or reset this product.
6.
After the script file is executed, the user program is executed. ( Page 82 Operation after registration of a script file)
Precautions
A script file is necessary to execute a user program. ( Page 81 Script file creation)
9 CREATION AND REGISTRATION OF USER PROGRAMS
9.3 User Programs for the VxWorks Part
9
83