Installation Position - Mitsubishi Electric MELIPC MI5000 Series User Manual

Installation position

To improve the airflow and ensure easy replacement of power supply and fan modules, provide clearance between the
product and structures/parts as shown below.
5mm or more
The shaded area in the illustration shows the control panel ceiling, wiring duct, and parts.
*1 Provide clearance of 30 mm or more when the height of a wiring duct is 50 mm or less. If the height of the duct is more than 50 mm,
provide clearance of 40 mm or more.
*2 If connecting an external device connector, 90 mm or more.
*3 If connecting an external device connector and fixing mounting location fixing bands, 100 mm or more.
Installation direction
To improve heat dispassion, install in the following direction.
■Erroneous installation direction
Do not install the programmable controller in the following direction.
2 PRODUCT INSTALLATION
20
2.1 Product Installation
5mm or more
*1
30mm or more
*2
90mm or more
*3
100mm or more