Chapter 1 Procedure Before Operation - Mitsubishi Electric MELIPC MI5000 Series User Manual

1
PROCEDURE BEFORE OPERATION
This section shows the procedure before operation of this product.
When the product is to be run for the first time, prepare this product using the following procedure.
1.
Installing this product ( Page 18 PRODUCT INSTALLATION)
Perform the following operations to install this product.
• Installation of this product
• Insertion of a battery
• Wiring of the power supply module
2.
Executing hardware diagnoses ( Page 34 HARDWARE DIAGNOSES)
3.
Installing a CFast card ( Page 40 CFast CARD INSTALLATION)
Insert a CFast card in the product as necessary.
4.
Setting up Windows ( Page 48 Windows SETUP)
Perform the following work to set up Windows.
• Connecting peripheral devices
• Windows setup and initial settings
5.
Wiring and connecting system components ( Page 57 WIRING AND CONNECTION OF SYSTEM COMPONENTS)
6.
Setting parameters ( Page 68 PARAMETER SETTINGS)
Perform the following work to configure the parameters.
• Creating a project
• Setting parameters
• Writing parameters
7.
Checking for errors( Page 70 ERROR CHECK)
8.
Creating and registering user programs ( Page 72 CREATION AND REGISTRATION OF USER PROGRAMS)
Precautions
Do not change product BIOS settings. If BIOS settings are changed, this may result in erroneous operation of the product.
1 PROCEDURE BEFORE OPERATION
16