Ip Address Setting - Mitsubishi Electric MELIPC MI5000 Series User Manual

IP address setting

The setting to automatically acquire the Ethernet port (CH2) IP address at initial Windows startup.
The IP address settings of Ethernet port (CH2) is changed by Ethernet CH2 (Intel(R) I210 Gigabit Network Connection #
Change the IP address settings of the Ethernet port (CH2) as necessary.
*1 : Number
Setting method
Windows Start  [Windows System Tools]  [Control Panel]  [View network status and tasks]  [Change adapter
settings]
Precautions
• If the Ethernet cable is not connected correctly, Ethernet CH2 (Intel(R) I210 Gigabit Network Connection #) may not be
displayed. Connect the Ethernet cable correctly.
• Do not change the virtual Ethernet (Wind River Virtual Network Adapter) settings. If the settings are changed,
communication between the VxWorks part and Windows part using virtual Ethernet is no longer possible.
• The following IP address ranges cannot be set for Ethernet port (CH2).
IP address: 172.16.0.1 to 172.31.255.255
Subnet mask: 255.240.0.0
5 Windows SETUP
54
5.2 Initial Settings
*1
)