Appendix 8 Recovery Of Windows; Execution Of Recovery - Mitsubishi Electric MELIPC MI5000 Series User Manual

Appendix 8
This section shows the recovery procedure for the Windows part of this product.
Recover the Windows part when the Windows part does not start or Windows needs to be initialized to factory setting.
Precautions
Do not turn OFF or reset this product during Windows recovery. Otherwise, Windows may not start normally. Recover
Windows again if Windows does not start normally.

Execution of recovery

This section shows the recovery procedure.
• To recover Windows, select an operation mode when the power supply of the product is ON.
• If the HOME switch is pressed when the display of the dot matrix LED is not 'Offline mode', the dot matrix
LED returns to the default display ('Offline mode').
1.
Power ON the product while pressing the SELECT switch () (1) and HOME switch (2).
Press and hold the SELECT switch () and HOME switch until 'Offline mode' is displayed on the dot matrix LED.
(2)
(1)
2.
After 'Offline mode' is displayed on the dot matrix LED, release the SELECT switch () and HOME switch.
3.
Press the SELECT switches (/) (3) to select the diagnosis mode.
Switch until 'Recovery mode' is displayed on the dot matrix LED.
(3)
4.
Press the SELECT switch () (4).
(4)
'Windows' is displayed on the dot matrix LED.
Recovery of Windows
APPX

Appendix 8 Recovery of Windows

A
149