Product Installation; Installation Environment - Mitsubishi Electric MELIPC MI5000 Series User Manual

2.1

Product Installation

This section shows the procedure to attach this product to a control panel or similar device.
When installing this product in the control panel, pay full attention to the ease of operability of connected cables and switches;
the ease of maintenance including replacement and installation of power supply modules and fan modules; and environments
resistant to noise and heat.
• The power supply module is installed on the main module when this product is purchased. Before using this
product, make sure that the power supply module is installed correctly on the main module.
• When installing this product, hold the section near the base of the main module of this product.

Installation environment

Install this product in the environment shown in the general specifications. ( Page 114 Product Specifications)
Do not install or store the product in the following locations. Doing so may result in fire, malfunction, or deterioration in
performance.
• Locations in which the ambient temperature is outside 0 to 55
• Locations in which the ambient humidity is outside 5 to 95% RH
• Locations subject to condensation because of rapid changes to temperature or humidity
• Locations with corrosive gases or chemicals, flammable gases, or radioactive materials
• Locations with substantial quantities of conductive powder such as dust or dirt, oil mist, salt, or organic solvents
• Locations in direct sunlight
• Locations with strong electrical or magnetic fields
• Locations in which power supply lines are subject to strong electromagnetic noise
• Location subject to direct or indirect vibration or strong shocks
2 PRODUCT INSTALLATION
2.1 Product Installation
2
19