Appendix 6 Menu Operation Switch; Menu Selection Mode - Mitsubishi Electric MELIPC MI5000 Series User Manual

Appendix 6
This section shows the operation methods of the menu operation switches.
This product is equipped with the following three modes, and the following operations can be performed from the menus
displayed on the dot matrix LED.
Mode
Normal mode

Menu selection mode

Offline mode
Menu selection mode
This section shows the operations during menu selection mode and the display specifications of the dot matrix LED.
Display of dot matrix LED
The following table shows the displays of the dot matrix LED.
Dot matrix LED
MENU

Display mode
User
Error code
CH1 IP address
FAN alert term
Maintenance 
FAN alert
*1 Displays the value specified by a C Controller module dedicated function (CCPU_SetDotMatrixLED). When this operation is selected
again after a change to another operation, the value displayed last time is displayed.
*2 Displays the error that occurred most recently. (When no error has occurred, "" is displayed. )
To exit the display of the error code, select "User".
Sections that do not appear on the dot matrix LED are displayed by scrolling (right to left).
APPX
140

Appendix 6 Menu Operation Switch

Menu Operation Switch
The power supply of the product is ON or the menu
selection mode was closed.
(Nothing is displayed on the dot matrix LED)
This mode (menu) appears on the dot matrix LED
when the HOME switch was pressed in Normal mode.
This mode (menu) appears on the dot matrix LED
when the power supply of this product turned on while
the SELECT switch () and HOME switch were
pressed.
Description
Initial display when the menu selection mode starts.
Select this mode to confirm error codes and display IP addresses.
Displays the content specified by the user.
Display error codes.
Displays the Ethernet port (CH1) IP address.
Shows the period (unit: days) until the FAN LED turns on.
If the FAN LED turns off, then select this mode.
Alert reset Turn the FAN LED off.
Clears the count for the period (unit: days) until the FAN LED turns on.
Operation
Information items selected by the Display
mode of the menu selection mode are
displayed on the dot matrix LED.
The following operations are possible.
• Display of a user-specified character string
• Confirm generated error codes
• Confirm the Ethernet port (CH1) IP
address
• Confirm the period until the FAN LED turns
on.
• FAN LED off
The following operations are possible.
• Product initialization
• Hardware diagnostics
• Recovery of Windows
*1
*2
Reference

Page 140 Menu
selection mode
Page 144 Offline
mode