Welcome To Windows" Specifications; Creating A Recovery Medium; Windows 10 Standard Functions - Mitsubishi Electric MELIPC MI1002-W-CL User Manual

5.1.2. "Welcome to Windows" specifications

The image stored on the preinstallation or recovery medium is the image after running sysprep and
generalize.
"Welcome to Windows" starts at the initial startup.
Language selection
Product key input
User creation
Automatic logon

5.1.3. Creating a recovery medium

In this product, the image file (recovery.iso) for creating a recovery medium is stored in the following
folders:
C:\Recovery_Media
The recovery medium allows you to return the system to the state at the time of purchase.
It is recommended to create a recovery medium in advance by using writing software.



5.1.4. Windows 10 standard functions

This product does not support the following Windows 10 standard functions.
Therefore, do not use these functions.
 Push-Button Refresh
 Push-Button Reset
 Virtualization-based security (VBS)
To prevent an automatic restart of the Windows section by an automatic update of Windows Update while
this product is in operation (a user is logged into the Windows section), change the following group policy
from the Windows default settings.
Group policy
No auto-restart with logged on users for scheduled automatic updates installation
Item
Y
EULA Y
N
Y
Y
Prepare a blank single sided dual layer DVD with a capacity of 8.5 GB or more.
At recovery using a recovery medium, the OS image for creating a recovery
medium is not restored.
Therefore, save the created recovery medium in a safe place.
Setting
Displayed (Japanese, English, and Chinese
(simplified))
Displayed
Not displayed
Displayed
If a password is specified when creating a user
account, automatic logon will not be performed.
11
Setting after change
Enabled