Table of Contents
Advertisement
Appendix 6
This section shows the operation methods of the menu operation switches.
This product is equipped with the following three modes, and the following operations can be performed from the menus
displayed on the dot matrix LED.
Mode
Normal mode
Menu selection mode
Offline mode
Menu selection mode
This section shows the operations during menu selection mode and the display specifications of the dot matrix LED.
Display of dot matrix LED
The following table shows the menus displayed on the dot matrix LED and the operation after each menu is selected.
Dot matrix LED
MENU
Display mode
User
Error code
CH1 IP address
FAN alert term
Maintenance
FAN alert
Auto-reset
Windows
*1 The value specified by a C Controller module dedicated function (CCPU_SetDotMatrixLED) is displayed. When this operation is
selected again after a change to another operation, the value displayed last time is displayed.
*2 The error that occurred most recently is displayed. (When no error has occurred, "" is displayed. )
To exit the display of the error code, select "User".
*3 If the power is turned OFF and ON or this product is reset, the selection status is returned to 'Parameter'.
*4 The following shows the functions affected by this setting.
Function to forcibly restart Windows part during an error
Windows part startup monitoring function
For details on the functions, refer to the following:
MELIPC MI5000 Series User's Manual (Application)
• Operations are performed by pressing the OK switch after selecting a menu. (Page 141 Switch
operations)
• Sections that do not appear on the dot matrix LED are displayed by scrolling (right to left).
APPX
140
Appendix 6 Menu Operation Switch
Menu Operation Switch
The power supply of the product is ON or the menu
selection mode was closed.
(Nothing is displayed on the dot matrix LED)
This mode (menu) appears on the dot matrix LED
when the HOME switch was pressed in Normal mode.
This mode (menu) appears on the dot matrix LED
when the power supply of this product turned ON while
the SELECT switch () and HOME switch were
pressed.
Description
The initial display when the menu selection mode starts.
To display the content specified by the user.
To display error codes.
To display an IP address of the Ethernet port (CH1).
To display the period (unit: days) until the FAN LED turns on.
Alert reset
To turn the FAN LED off.
The count for the period (unit: days) until the FAN LED turns on is cleared as well.
Parameter
To restart the Windows part automatically according to the parameter settings. (Default)
*3,*4
Disable
To stop an automatic restart of the Windows part regardless of the parameter settings.
Operation
Information items selected for the Display
mode in the menu selection mode are
displayed on the dot matrix LED.
The following operations can be performed.
• Display a user-specified character string
• Confirm generated error codes
• Confirm the Ethernet port (CH1) IP
address
• Confirm the period until the FAN LED turns
on
• Turn FAN LED off
• Set the operation for an automatic restart
of the Windows part
The following operations can be performed.
• Initialize this product
• Diagnose hardware
• Recover Windows
*1
*2
Reference
Page 140 Menu
selection mode
Page 144 Offline
mode
Advertisement
Table of Contents
