Problems With The Software - GE Amersham Imager 600 Operating Instructions Manual

8.3

Problems with the software

This section describes possible causes and corrective actions for problems with the
software. If the problem persists after taking the suggested corrective action, contact
your GE representative.
After exposure, no image is
displayed on the screen
If...
The light source does not function prop-
erly
The sample is not in position
The screen of Amersham Imager
600 is not displayed on the
connected tablet computer
If...
Wireless access points are not properly
set
The buttons do not appear on an
external monitor
If...
The monitor resolution is too low
Amersham Imager 600 Operating Instructions 29-0645-17 AD
8 Troubleshooting
8.3 Problems with the software
Then...
Contact your GE representative
Check the sample position
Then...
Contact the network administrator or
connect a monitor, mouse and keyboard
directly with a cable
Then...
Use monitors with SVGA resolution or
higher
217