GE Amersham Imager 600 Operating Instructions Manual page 100

5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
Chemiluminescence with
semi-automatic exposure
Follow the instructions below to perform chemiluminescence capture using semi-auto-
matic exposure time.
Step
1
2
3
4
5
100
Action
In the Capture tab, select Chemiluminescence.
Result: The options available for chemiluminescence capturing are displayed
to the right on the screen.
If your sample contains a colorimetric marker, then select the check box
Colorimetric marker.
To use the full dynamic range of the image file, check High dynamic range.
To minimize exposure time, leave High dynamic range unchecked.
Select Semi-Auto exposure in the exposure drop down menu.
Select Next and wait for the pre-exposure to finish.
Amersham Imager 600 Operating Instructions 29-0645-17 AD