GE Amersham Imager 600 Operating Instructions Manual page 13

Personal protection
Amersham Imager 600 Operating Instructions 29-0645-17 AD
WARNING
Do not damage the power supply cord by bending, twisting, heating
or allowing them to become pinned under the equipment. Using
damaged power cords could result in fire or electric shock.
If the power supply cords are damaged, contact your local GE
representative for replacements.
WARNING
Access to power switch and power cord with plug. Do not block
access to the power switch and power cord. The power switch
must always be easy to access. The power cord with plug must
always be easy to disconnect.
WARNING
Do not block vents and ensure that they are kept free of dust and
dirt. Blockage can cause overheating and malfunctioning. To ensure
adequate cooling ensure there is at least 40 cm of free space in
front of the instrument and at least 10 cm on all other sides to walls
or other equipment.
WARNING
Hazardous substances. When using hazardous chemicals, take
all suitable protective measures, such as wearing protective
glasses and gloves resistant to the substances used. Follow local
and/or national regulations for safe operation and maintenance
of the system.
2 Safety instructions
2.1 Safety precautions
13