GE Amersham Imager 600 Operating Instructions Manual page 76

4 Installation
4.4 Network
4.4.1 Network setup
Connect to network
Follow the instructions below to connect to a Network:
Step
1
2
3
Connect to a DHCP network
Follow the instructions below, to connect to a DHCP network:
76
Action
Select the settings icon.
Result: The Settings view will appear.
Select the Network button.
Result: The Network view will appear.
Select the type of network connection and follow the separate instructions
below.
Amersham Imager 600 Operating Instructions 29-0645-17 AD