GE Amersham Imager 600 Operating Instructions Manual page 102

5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
Step
7
8
102
Action
Choose one of the two options displayed to the right of the image to point
out the area of interest:
•
Choose , then select one point of interest in the image.
Result: The selected point is highlighted with an X.
•
Choose , and then select two diagonal corners of an area of interest
in the image.
Result: The selected area is highlighted with a square.
Use the right hand side arrow buttons to move the highlighted point or area.
Select Start exposure and wait for the exposure to finish.
Amersham Imager 600 Operating Instructions 29-0645-17 AD