GE Amersham Imager 600 Operating Instructions Manual page 170

5 Operation
5.8 Analyze the image
5.8.3 Band detection
Step
3
4
5
170
Action
To make manual changes, select one detection channel from: Sample,
Markers, Blue, Green or Red above the image and select one or more rele-
vant options.
To create a new band, point to the position in the image.
•
Result: A new highlighted band appears.
To shift a band position, select the band and shift the band position up
•
or down with the Position arrow buttons.
To adjust a band width, select the band and adjust it with the Width plus
•
and minus buttons.
To delete a band, select the band and press Delete.
•
To delete all detected bands in the image, select Clear.
•
Repeat actions in step 3 for other detection channels, if relevant.
When you are done detecting bands press the Next button or select the MW
button in the workflow. The Previous button will bring you back to the previ-
ous step.
Amersham Imager 600 Operating Instructions 29-0645-17 AD