GE Amersham Imager 600 Operating Instructions Manual page 223

Parameter
Installation location conditions
Operation site
Maximum operating altitude
Noise
Protection provided by enclosure
Overvoltage category
Rated pollution applied
Amersham Imager 600 Operating Instructions 29-0645-17 AD
Condition
Do not install the instrument:
1 where the temperature can vary widely (with temperature fluc-
tuation above 10ºC per hour)
2 near a heat source such as a radiator
3 where it may get wet or flooded.
4 where it may be exposed to corrosive gas
5 in a dusty environment
6 in a place constantly or excessively exposed to vibration or im-
pacts
7 in a place exposed to direct sunlight
Indoor use
2000 m or lower
70 dB(A) or lower
Fast Lmax ≤60dB(A), and average Leq ≤ 54dB(A) (1 m from the instru-
ment)
IP21
Transient overvoltage category II
Pollution degree 2
9 Specifications
223