GE Amersham Imager 600 Operating Instructions Manual page 97

When...
The intensity of the
image is inadequate af-
ter automatic exposure
or a known exposure
time is required:
A sequence of images is
required:
Full control of exposure
parameters is required
for special applications:
Note:
Chemiluminescence with
automatic exposure time
Follow the instructions below to perform chemiluminescence capture using automatic
exposure time.
Step
1
Amersham Imager 600 Operating Instructions 29-0645-17 AD
Then...
Select Manual exposure and set the exposure time man-
ually.
Select Incremental exposure and set the number of repe-
titions and interval time of the exposures to capture se-
quential images.
Select Advanced exposure
Do not open the door during exposure as this will stop the exposure and the data
will not be saved.
Action
In the Capture tab, select Chemiluminescence.
Result: The options available for Chemiluminescence capturing are displayed
to the right on the screen. Automatic exposure is selected by default and
the Exposure options field displays Auto.
5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
97