System Boot Up - GE LOGIQ A3 Basic Service Manual

GE H
EALTHCARE
D 5213326-100, R
IRECTION
3-4-4-2

System Boot Up

Press the Power On/Off switch on the Control Panel once.
1
1-Power ON/OFF Switch
When the Power On/Off switch on the Control Panel is pressed once, the Power is distributed to the
Front-End, to the Peripheral outlets and to the Master Board at Back End. Master Board at Back End
starts and the software is initiated to start the scanner.
No status messages are displayed during this process.
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 72 of 252
3
EVISION
Figure 3-9 Power On/Off Switch for Back-end Processor Boot Up
Chapter 3
LOGIQ™ A3 S M
ERVICE ANUAL
3-15